| | |
|
| |
| | |
|
Decompression
Leasing Info
|
Analagraph®
|
|
List Price: $1,995.00
SALE PRICE: $1,899.99
Personalization
* denotes required field
Select*
|
| Analagraph® |
|
 The Analagraph® Recorder, when used in conjunction with the Nervo-Scope® ETS-7 or ETS-8, provides a permanent record to log and chart the amount of existing heat differences indicated from your Nervo-Scope® readings.
The Analagraph® Recorder is a valuable and efficient tool in documenting patient assessments and providing a pattern reference for pre and post check of patients. This information indicates any change of reading, thus establishing a pattern which may assist in determining the frequency of adjustments. Easy to use and operate, the Analagraph® Recorder has been trusted for over 50 years in the Chiropractic community.
CHR1: $1,995.00
| Power Input: |
120Vac @ 60Hz, 1A |
| Overload Protection: |
3 AG, 250V slo-blow glass body fuse (rear panel) |
| Ambient Operating Range: |
32 to 140F |
| Relative Humidity (max.): |
10% to 90% non-condensing |
| Recorder Resolution: |
0.02F |
| Power Consumption: |
Recorder- 5 watts @ 0.3 amps on recording mode. 1/2 watt on standby |
| Printing Method: |
Direct thermal |
| Print Resolution: |
200 x 800 DPI |
| Graph Speed Rate: |
Low: 6 inches per minute (2.5 mm sec.)
High: 9 inches per minute (3.75 mm sec.) |
| Graph Paper Type: |
Thermal activation |
| Graph Paper Size: |
2 inch wide roll x 100 feet long |
| Graph Paper Thickness: |
0.0025" |
| Graph Grid Size: |
0.195" squares x 8 horizontally x continuous vertically |
| Switching:Power: |
On/Off rocker switch on rear panel |
| Graph On/Off: |
Starts/stops thermal graphing |
| Time Marker: |
Automatic horizontal dashed lines every 3 vertical grid squares |
| Manual Marker: |
Allows manual placement of horizontal dashed lines at any vertical interval |
| High/Low Speed: |
Sets graph paper speed rate |
| Audible Sound: |
Beep occurs for "graph on", "time marker" & "manual marker" intervals |
| Green Light indicator: |
For "graph on" (active) |
| Red Light Indicator: |
For "graph off" (standby) |
| ETS-7/ETS-8 Input Socket: |
Accepts coil cord, linking Nervo-Scope to Analagraph |
| Coil Cord: |
6 ft. (expandable to 12 ft.) 6 wire pickup |
| Case: |
High impact Black ABS with handle. Powder coated front/rear panels |
| Size: |
8.5" width x 6.4" height x 9.2" deep. Not including handle |
| Weight: |
5 lbs. | |
Item Number: Analagraph
Manufacturer: EDL
Manufacturer Part No: Analagraph
|
|